Table of Contents
Advertisement
GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Specifications
Gain Adjustment
Blemish Correction
ALC
Gamma
LUT
Power Supply
Lens mount
Flange Back
Optical filter (IR cut filter)
Verified performance temperature /
humidity
Storage temperature / humidity
Regulations
Dimensions (housing)
Weight
Notes:
Approximately 5 minutes of warm-up are required to achieve these specifications.
l
Design and specifications are subject to change without notice.
l
Manual Adjustment
0 dB to +24 dB 1 step = x0.01 (0.005 dB to 0.08 dB) (varies by
Range
setting value)
Auto Gain
Off / Continuous
WB Gain*
R / B: - 7 dB ~ + 15 dB、1 Step = 0.1 dB
WB Area*
16 (4 × 4) Area
White Balance*
Off / Continuous / Once
*Color models only
Detect white blemishes using threshold values (black blemish correction
Detection
performed only at factory)
Correction
Interpolation using adjacent pixels (continuous blemishes not corrected)
Correctable
256 Pixels
Pixels
Adjusts exposure automatically using combination of AGC and auto shutter
0.45, 0.6, 1.0 (3 steps available)
OFF: γ = 1.0、 ON = 256 points can be set
Input range
6-Pin
Current
Connector
Consumption
Input range
PoE
Current
Consumption
C-mount
Lens mount protrusion length of 9 mm or less is supported
17.526, tolerance: 0 mm to ~ -0.05 m
Mono: Not provided
Color: Half value of 670 nm
-5°C to +45°C / 20 to 80% (non-condensing)
-25°C to +60°C / 20 to 80% (non-condensing)
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE, KC
29mm × 29mm × 41.5mm (W x H x D)(excluding mount protrusions)
46g
- 102 -
Description
DC +12 V to +24 V ±10% (via input terminal)
220mA ± 20mA (at 12 V input, full pixel) (Typical)
2.64W (at 12 V input, full pixel) (Typical)
DC 36 V to 57 V
63mA ± 6mA (at 48 V input, full pixel) (Typical)
3.02W (at 48 V input, full pixel) (Typical)
Miscellaneous
Advertisement
Table of Contents
