Table of Contents
Advertisement
GO-5000M-PMCL-UV User Manual (Ver. 1.1)
RCT Mode Together with ALC Function
RCT mode can use ALC control to ensure that the proper exposure is set when the trigger pulse is
input. In this case, the following settings are additionally required to RCT mode settings.
1. Exposure Auto: Continuous
2. Gain Auto: Continuous
In the following drawing, the steps to achieve this combination are explained.
①
The exposure control is the same as in continuous mode.
When the trigger signal is input, the charge that has already been accumulated during the current
②
exposure period is read out very quickly and a new exposure period starts. The exposure continues as in
continuous mode.
③
All video level data from every exposure is transferred to ALC control.
④
The video output sent to the GigE interface is only the signal after the trigger is input.
- 79 -
Main Functions
Advertisement
Table of Contents
