GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
To Use the Gamma Function
Configure the settings as follows.
Item
Gamma
0.45, 0.60, 1.0 (Off)
JAI LUT Mode
Gamma
Note: You can use the LUT function to configure a curve with more detailed points. For details,
see
"LUT (Lookup
Line Status
Related Setting Items:
The Line Status function allows you to verify the status of external input/output signals. You can verify
the status of the following signals.
Opt Out 1, Opt Out 2, Opt In 1
l
Time Stamp Reset
l
NAND Gate 0 In 1, NAND Gate 0 In 2, NAND Gate 1 In 1, NAND Gate 1 In 2
l
Setting Value / Selectable Range
Table)".
Digital IO Control
Select the gamma correction value.
Use gamma.
- 56 -
Main Functions
Description