GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
1. Set Exposure Mode to Timed. (Timed is the default setting.)
2. Specify the exposure time in Exposure Time. The setting value for the exposure time can only
be changed when Exposure Auto is set to Off. If Exposure Auto is set to Continuous,
temporarily set it to Off before changing the exposure time.
3. Set Trigger Selector to Frame Start. (Frame Start is the default setting.)
4. Set Trigger Mode to On.
If necessary, change the Trigger Source, Trigger Activation, and Exposure Auto settings.
- 31 -
Preparation