Video Send Mode; Overlap Multi Roi - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

Video Send Mode

Related Setting Items:
Switch the video transmission mode to configure and operate Multi ROI Mode.

Overlap Multi ROI

Related Setting Items:
In Overlap Multi ROI mode, you can specify up to five scanning areas (Index 1 to 5) for a single-frame
image. On this camera, the areas can overlap, and a separate frame will be output for each area.
Specify the areas by specifying width, height, and horizontal/vertical offset values for each index under
JAI Custom Control MultiROI.
Note: Please refer to
Sensor Multi ROI function (Sensor Multi ROI is supported only by GO-2400MC-PGE).
JAICustomControlMisc
JAICustomControlMultiROI
Sensor Multi ROI Function for the difference between this function and the
- 65 -
Main Functions