Table of Contents
Advertisement
GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Notes:
*Height_s: Line scanned by the sensor.
l
**Height_g, Width_g: Height and width of output streams.
l
***12-bit binning is not supported.
l
Caution:
Although the maximum frame rate value is determined by the GigE bandwidth range,
when ROI is configured, the frame rate cannot exceed the sensor output's allowable frame rate
value.
Exposure Mode
Related Setting Items:
The following exposure modes are available on the camera.
Exposure
Mode
Setting
OFF
Exposure control is not performed (free-running operation).
Mode in which control is performed using exposure time. Acquire images using an exposure time
Timed
configured beforehand on an external trigger.
Mode in which control of the exposure time is performed using the pulse width of the trigger input
Trigger
signal. The exposure time will be the same as the pulse width of the trigger input signal. This
Width
allows long exposure.
Note: The settings for exposure control and triggers are related to each other. Be sure to
configure the settings described in
AcquisitionControl
Exposure Operation
"Configure Exposure and External Trigger
- 47 -
Main Functions
Settings".
Advertisement
Table of Contents
