Acquisitioncontrol - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

AcquisitionControl

Configure image acquisition settings.
Note: Settings that can only be configured when image acquisition on the camera is stopped.
Acquisition Setting
Control Item Range
Single Frame
Acquisition Mode Multi Frame
Continuous
Acquisition Start
Acquisition Stop
Acquisition Frame
1 ~ 255
Count
Acquisition Frame 0.125 ~
Rate (Hz) 48.8496
Acquisition
Start
Acquisition
End
Trigger Selector
Frame Start
Acquisition
Transfer Start
Off
Trigger Mode
On
Trigger Software
Low
High
Software
Pulse
Generator0
User Output
0
Trigger Source User Output
1
Action 1
Action 2
Line 5 -
Optical In 1
Nand0 Out
Nand1 Out
Default
Continuous
- -
- -
1
48.8496
Frame Start
Off
- -
Line 5 - Optical In
1
Select the image acquisition mode.
Related Topic: Acquisition Control
Start image acquisition.
Stop image acquisition.
In Multi Frame mode, set the number of frames to acquire.
Set the frame rate as a frequency. (unit: Hz) The maximum value varies
depending on the TapGeometory and ROI settings.
Select the trigger operation.
Related Topic: Trigger Control
Select the trigger mode.
Execute a software trigger.
Select the trigger signal source.
- 79 -
Description
Settings List