Sensor Multi Roi Function - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Sensor Multi ROI Function
Related Setting Items:
Sensor Multi ROI is an ROI function that is configured and functions inside the sensor. You can
configure up to 16 scanning regions (4 horizontal and 4 vertical).
By skipping areas that are not specified as regions of interest when scanning a frame, the sensor's
ROI function outputs the specified regions in a compressed state. You can increase the frame rate due
to the reduced scanning time for the compressed areas. However, you cannot make the line frequency
faster by compressing in the horizontal direction.
Note: This function is supported only on GO-2400M-PGE and GO-2400C-PGE.
Restrictions
The specified areas cannot overlap.
l
The frame rate can be increased in relation to size of the area specified in the vertical
l
direction, but not in relation to the horizontal direction.
In the horizontal direction, the configuration for the second and subsequent row will be
l
identical. In the vertical direction, the configuration for the second and subsequent column
will be identical.
JAICustomControlMultiROI
- 61 -
Main Functions