JAI GO-2400M-PGE User Manual page 89

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Transport Layer Control
Item
GevTimestampTickFrequency
GevTimestampControlLatch
GevTimestampControlReset
GevTimestamp Value
GevCCP (Control Channel Privilege)
GevMCHostPort (Message Channel Port)
MCDA (Message Channel Destination
Address)
GevMCTT (Message Channel
Transmission Timeout (ms))
GevMCRC (Message Channel Retry
Count)
GevMCSP (Message Channel Source
Port
GevStreamChannelSelector
GevSPCHostPort
GevSCPSDoNotFragment
GevSCPSPacketSize
GevSCPD (Stream Channel Packet
Delay)
GevSCDA (Stream Channel
Destination Address)
GevSCSP (Stream Channel Source
Port)
GevIEEE 1588
IEEE 1588 Status
Setting Range
-
-
-
-
-
-
000.000.000.000 ~
255.255.255.255
0 ~ 4294967295
0 ~ 4294967295
-
-
0 ~ 4294967295
False
True
1476 ~ 16020
0 ~ 4000000
000.000.000.000 ~
255.255.255.255
-
False
True
PTP Stopped, PTP
Initializing, PTP Faulty, PTP
Disabled, PTP Listenning,
PTP PreMaster, PTP
Passive, PTP Uncalibrated,
PTP Slave
- 89 -
Default
1000000000 Display the timestamp frequency.
- Latch the timestamp value.
- Reset the timestamp value.
0 Display the timestamp value.
Control Access Display the control channel privilege.
Set the port number for the message
-
channel.
Set the destination IP address for the
-
message channel.
Set the transmission timeout for the
400
message channel. (unit: ms)
Set the retry count for the message
3
channel.
Display the port number of the message
-
channel source.
0 Select the stream channel.
The port to which the device must send
50332 data stream. Setting this value to 0 closes
the stream channel.
True Enable/disable "Do Not Fragment."
1476 Set the packet size.
0 Set the packet delay.
Set the destination IP address for the
0.0.0.0
stream channel.
Display the port number of the stream
50332
channel source.
TRUE : Enables PTP
FALSE: Disables PTP
False
Related Topic:
Protocol) Function
PTP Disabled Display the status of IEEE 1588.
Settings List
Description
PTP (Precision Time