Counter And Timer Control Function; Counter Occurrence Diagram; Internal Camera Blocks - JAI GO-2400M-PGE User Manual

Cmos digital progressive scan monochrome and color camera with gige interface

Hide thumbs Also See for GO-2400M-PGE:

Table of Contents

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

Counter and Timer Control Function

Related Setting Items:

Note: This camera supports only the counter function.

The counter function counts up change points in the camera's internal signals using the camera's

internal counter and reads that information from the host side. This function is useful for verifying error

conditions via the count value using internal camera operations.

Counting is performed at frame trigger, frame start, exposure start, and exposure transfer end, and by

comparing these values, you can determine the internal camera state at which missed triggers will

occur.

Note: To reset the counter itself, execute Counter Reset or enter "1" in Counter Reset.

JAICustomCounterAndTimerControl

- 73 -

Main Functions

Table of Contents

Go-2400c-pge Go-2401m-pge Go-2401c-pge