GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
1. Set Exposure Mode to Timed. (Timed is the default setting.)
2. Specify the exposure time in Exposure Time. The setting value for the exposure time can only
be changed when Exposure Auto is set to Off. If Exposure Auto is set to Continuous,
temporarily set it to Off before changing the exposure time.
3. Set Trigger Mode to Off.
4. If necessary, change the Exposure Auto setting.
When not Controlling the Exposure Time
1. Set ExposureMode to Off.
The exposure will be performed with an exposure time equal to 1 / frame rate.
Note: ExposureTime will be disabled, and ExposureAuto cannot be used.
- 34 -
Preparation
+