JAI GO-2400M-PGE User Manual page 87

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
LUT
Setting
Control
Range
Item
Pulse
Generator 0.002222 ~
End Point 2330.166666
(ms)
Pulse
-1.79769e+308
Generator
~
Pulsewidth
1.79769e+308
(ms)
Pulse
Generator
0 ~ 255
Repeat
Count
Off
Pulse
High Level
Generator
Low Level
Clear
Rising Edge
Activation
Falling Edge
Low
High
Acquisition
Trigger Wait
Frame Trigger
Wait
Frame Active
Exposure
Active
Pulse
FVAL
Generator
Clear Source LVAL
User Output 0
User Output 1
Action 1
Action 2
Line 5 - Optical
In 1
Nand0 Out
Nand1 Out
Pulse
False
Generator
Clear True
Inverter
Pulse
Generator Async Mode
Clear Sync
Sync Mode
Mode
Default
Set the start point of the Low interval in milliseconds. When the counter reaches this
33.3333 value, the output will be 0. The setting range varies depending on the Clock Pre-scaler
value.
Display the High interval width of the pulse in milliseconds. The duration between the
33.3333 Start Point and End Point is calculated. The setting range varies depending on the Clock
Pre-scaler value.
Set the repeat count for the counter. When this is set to 0, a free counter is enabled with
0
no repeat limit.
Off Set the clear signal condition for the count clear input of the pulse generator.
Low Select the count clear input signal source.
False Select whether to invert the polarity of the count clear input signal.
Async
Select the sync mode for the count clear input signal.
Mode
Description
- 87 -
Settings List