JAI GO-2400M-PGE User Manual page 84

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Sequencer Setting
Control Item Range
Sequencer Set Next 1 ~ 128
Sequencer Width 16 ~ 1936
Mono
1 ~ 1216
Sequencer Height
Color
2 ~ 1216
0 ~ (1936 -
Sequencer Offset X
Width)
0 ~ (1216 -
Sequencer Offset Y
Height)
Sequencer Gain 100 ~ 1600
- 4533 ~
Sequencer Gain Red
37876
- 4533 ~
Sequencer Gain Blue
37876
Sequencer Exposure
1 ~ 8000000
Time
False
Sequencer LUT
Enable
True
Sequencer Black
- 133 ~ 255
Level
1
2*
Sequencer H Binning
*
Monochrome
models only
1
2*
Sequencer H Binning
*
Monochrome
models only
Sequencer Repetition 1 ~ 255
Gamma
Sequencer LUT Mode
LUT
Sequencer Set Active
Sequencer Command
1 ~ 128
Index
Sequencer Set Start 1 ~ 128
Sequencer Reset
Default
Set the next index to be displayed for the selected Sequencer Index. (Enabled
1
only for Trigger Sequencer.)
1936 Set the width of the selected Sequencer Index.
1216 Set the height of the selected Sequencer Index.
0 Set the horizontal offset value for the selected Sequencer Index.
0 Set the vertical offset value for the selected Sequencer Index.
100 Set the gain for the selected Sequencer Index.
0 Set the red gain for the selected Sequencer Index.
0 Set the blue gain for the selected Sequencer Index.
20363 Set the exposure time for the selected Sequencer Index.
False Enable/disable the LUT setting for the selected Sequencer Index.
0 Set the black level for the selected Sequencer Index.
1 Set the horizontal binning for the selected Sequencer Index.
1 Set the vertical binning for the selected Sequencer Index.
1 Set the repeat count for the sequencer.
Gamma Set the sequencer LUT mode.
- - Displays the active LUT number.
Set this to change the Sequencer Index. (Enabled only for Command
1
Sequencer.)
Set the index number that is used when executing Sequencer Reset in Trigger
1
Sequencer mode or Command Sequencer mode.
- - Reset the current index number to the number configured in Sequencer Set Start.
Description
- 84 -
Settings List