JAI GO-2400M-PGE User Manual page 62

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Configuration
Configure each area so that they do not overlap. Both the horizontal and vertical settings must be
configured as even values.
Horizontal ROI conditions
ROIOffsetH1 + ROIWidth1 < ROIOffsetH2
ROIOffsetH2 + ROIWidth2 < ROIOffsetH3
ROIOffsetH3 + ROIWidth3 < ROIOffsetH4
ROIOffsetH4 + ROIWidth4 < 1936
Vertical ROI conditions
ROIOffsetV1 + ROIHeight1 < ROIOffsetV2
ROIOffsetV2 + ROIHeight2 < ROIOffsetV3
ROIOffsetV3 + ROIHeight3 < ROIOffsetV4
ROIOffsetV4 + ROIHeight4 <1216
Configure the eight index settings (Index 1 to 4). The OffsetH, Width, OffsetV, Height, Horizontal
Enable, and Vertical Enable settings can be configured for each index.
When you configure the OffsetH, Width, OffsetV, and Height settings for an index and set Horizontal
Enable or Vertical Enable to True for that index, the corresponding area is configured.
OffsetH、 Width: 16 pixels/step
OffsetV、 Height: 2 lines/step
- 62 -
Main Functions