Video Process Bypass Mode - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

Video Process Bypass Mode

The video process bypass mode is a function that bypasses internal video processing on the camera.
When bypass is enabled, the sensor output and camera output data can be set to the same bit width.
Operation using 12-bit outputs must be performed in bypass mode.
Video Process
Bypass Mode
Camera operation
Camera output
Differences in camera operation
Video Process Bypass Mode = OFF: All video processes are enabled.
l
Video Process Bypass Mode = ON: All video processes except Gain all (excluding R/B Gain)
l
and Blemish Compensation are disabled.
Note: Binning function cannot be used in video process bypass mode.
To enable video process bypass mode
1. Set VideoProcessBypassMode (JAICustomControlMisc) to On.
All video processes except Gain all (excluding R/B Gain) and
Blemish Compensation are disabled.
8/10/12 bit
ON
- 75 -
Main Functions
OFF
All video processes
are enabled.
8/10 bit