Preparation - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

Preparation

Read this section to learn how the camera connects to devices and accessories. The preparation
process is described below.
Step 1: Install the Software (First Time Only)
1
Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the
l
computer.
Step 2: Connect Devices
2
Connect the lens, LAN cable, AC adapter, computer, and other devices.
l
Step 3: Verify Camera Operation
3
Verify whether the camera is turned on and ready for use.
l
Step 4: Verify the Connection between the Camera and PC
4
Verify whether the camera is properly recognized via Control Tool.
l
Step 5: Change the Camera Settings
5
Refer to the procedure for changing the output format setting as an example and change various
l
settings as necessary.
Step 6: Adjust the Image Quality
6
Refer to the procedures for adjusting the gain and black level as examples and adjust the image
l
quality.
Step 7: Save the Settings
7
Save the current setting configurations in user memory.
l
- 21 -
Preparation