Pulsegenerators - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Digital IO Control
Item
Line Format
Line Status All
User Output Selector
User Output Value

PulseGenerators

Configure pulse generator settings.
LUT
Setting
Control
Range
Item
Clock Pre-scaler 1 ~ 4096
Pulse Generator 0.018127 ~
Clock (MHz) 74.25
Pulse Generator Pulse
Selector Generator 0
Pulse
Generator 1 ~ 1048575
Length
Pulse
0.002222 ~
Generator
2330.166666
Length (ms)
Pulse
Generator 0.429154 ~
Frequency 450000
(Hz)
Pulse
Generator 0 ~ 1048574
Start Point
Pulse
Generator
0 ~ 2330.16
Start Point
(ms)
Pulse
Generator 1 ~ 1048575
End Point
Setting
Default
Range
- Opto Coupled Display the current I/F type.
- 0x00
User Output 0
User Output 0 Set the user output signal.
User Output 1
False
False
True
Default
Set the division value for the prescaler (128-bit length) using the pixel clock as the base
165
clock.
Set the clock used for the pulse generator. This value is calculated using the Clock Pre-
0.45
scaler value as a base.
Pulse
Generator Select the pulse generator.
0
30000 Set the maximum count-up value as a clock count.
Set the maximum count-up value in milliseconds. This value is calculated using the Pulse
66.6667 Generator Length value as a base. The setting range varies depending on the Clock
Pre-scaler value.
Set the maximum count-up value as a frequency. This value is calculated using the Pulse
15
Generator Length value as a base.
Set the start point of the High interval as a clock count. When the counter reaches this
0
value, the output will be 1.
Set the start point of the High interval in milliseconds. When the counter reaches this
0 value, the output will be 1. The setting range varies depending on the Clock Pre-scaler
value.
Set the start point of the Low interval as a clock count. When the counter reaches this
15000
value, the output will be 0.
Description
Display status of input signal.
Set the value for the User Output selected in User Output Selector.
Description
- 86 -
Settings List