Table of Contents
Advertisement
Characteristics of optical interface
The relationship of the input signal to the output signal through the optical interface is as follows.
Input Line Voltage Range ： +3.3v～+24V
Input Current ： 6mA～30mA
Output Load(Maximum Current) ： 100mA
Minimum Input Pulse Width to Turn ON ： 0.5us
Minimum Output Pulse Width ： 20us
Opt In Filter Selector function
As for the surge protection of the optical input, the filter can be selected from 5 steps which are
10 μs (Typical), 100 μs, 500 μs, 1 ms and 10 ms. If the filter is set, a pulse with a shorter width
than the filter setting value cannot be accepted.
— 23 —
GO-5000M-USB-UV
Advertisement
Table of Contents
