3M DBI-SALA EZ-Stop AJ512Y/0 User Instructions page 19

7.0 RFID TAG
7.1 LOCATION: 3M product covered in these user instructions is equipped with a Radio Frequency Identification (RFID)
Tag. RFID Tags may be used in coordination with an RFID Tag Scanner for recording product inspection results. See
Figure 19 for where your RFID Tag is located.
7.2 DISPOSAL: Prior to disposing of this product, remove the RFID Tag and dispose/recycle in accordance with local
regulations. For additional information on how to remove the RFID Tag, please refer to the website link below.
Do not dispose of your product as unsorted municipal waste. The crossed-out wheelie bin symbol indicates
that all EEE (Electrical and Electronic Equipment) must be disposed of according to local law through
available return and collection systems. Please contact your dealer or your local 3M representative for
further information.
For more information, please visit our website: http://www.3M.com/FallProtection/RFID
8.0 LABELS
Figure 20 illustrates labels on the the Energy Absorbing Lanyards and their locations. All labels must be present on the
Lanyard.
Information on each label is as follows:
Figure 20 Reference:
1
2
3
4
5
6
7
8
9
10
11
12
13
Description:
Model number
Serial number
Batch number
Address of the Manufacturer
Read these instructions before using the Lanyard
European standard
CE Marking of European Conformity
Number of Notified body carrying out Conformity to type
Length
Month of manufacture
Year of manufacture
Web Address of the Manufacturer
Capacity
19