Nvme Ssd Button Actions - HPE ProLiant DL160 Gen10 Maintenance And Service Manual

Item LED
4 Do not
remove
5 Power

NVMe SSD button actions

Status Definition
The drive is doing one of the following:
Flashing green
• Rebuilding
• Performing a RAID migration
• Performing a stripe size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
Flashing amber/ The drive is a member of one or more logical drives and predicts the
green drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Solid white Do not remove the drive. The drive must be ejected from the PCIe bus
prior to removal.
Flashing white The drive ejection request is pending.
Off The drive has been ejected.
Solid green Do not remove the drive. The drive must be ejected from the PCIe bus
prior to removal.
Flashing green The drive ejection request is pending.
Off The drive has been ejected.
Component identification 101