To install the air baffle, complete the following steps:
Figure 46. Air baffle installation
Step 1.
Align the air baffle hooks with the slots on the top of the fan cage; then, hook the air baffle onto the
slots.
After you install the air baffle, complete the following steps:
1. Install the top cover onto the server (see
2. Install the server into the rack if necessary.
3. Reconnect power cords and all external cables.
Install the top cover
Use this information to install the top cover.
To avoid possible danger, read and follow the following safety information.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
ThinkSystem SR150 Setup Guide
54
"Install the top cover" on page 54
for instructions).