Figure 82. Installing the OCP Ethernet adapter
Slide the adapter into the PCIe slot.
Tighten the captive screw to secure the adapter.
Step 3.
Reconnect the front USB cable.
Install the PCIe riser assembly
Follow instructions in this section to install the PCIe riser assembly.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
•
https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1.
Align the PCIe riser assembly with the connector on the system board, and push it in.
ThinkSystem SR860 V2Setup Guide
190