Mazda Mazda6 Workshop Manual Supplement page 524

Hide thumbs Also See for Mazda6:

Table of Contents

Oil Pipe, Hose Clamp, Oil Hose Installation Note

1. Apply compressed air to cooler-side opening, and

blow any remaining grime and foreign material

from the cooler pipes. Compressed air should be

applied for no less than one minute.

2. Align the marks, and slide the oil hose onto the oil

pipe until it is fully seated as shown.

• If reusing the hose, install the new hose

clamp exactly on the mark left by the

previous hose camp.Then apply force to the

hose clamp in the direction of the arrow in

order to fit the clamp in the place.

3. Install the new hose clamp onto the hose.

4. Verify that the hose clamp does not interfere with

any other components.

AUTOMATIC TRANSAXLE

Chapters

Table of Contents