Koeo/Koer Self-Test Procedure; After Repair Procedure - Mazda Mazda6 Workshop Manual Supplement

KOEO/KOER SELF-TEST PROCEDURE

1. Connect the WDS or equivalent to the vehicle
DLC-2 16-pin connector.
2. Perform KOEO/KOER self-test.
End Of Sie

AFTER REPAIR PROCEDURE

1. Connect the WDS or equivalent to the vehicle
DLC-2 16-pin connector.
2. Turn the engine switch to ON.
3. Record DTC if retrieved.
4. Erase all diagnostic data using WDS or
equivalent.
F2–86
ON-BOARD DIAGNOSTIC
DLC-2
DLC-2
A6E407018881208
A6E40702001
A6E407018881209
A6E40702001