Transaxle Fluid Temperature (Tft) Sensor Inspection - Mazda Mazda6 Workshop Manual Supplement

TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION

1. Disconnect the terminal component No.2
connector.
2. Remove the oil dipstick.
3. Insert the thermistor probe into the filler tube.
4. Start the engine.
5. Measure resistance between the terminals G and
H.
• If not as specified, replace the TFT sensor.
(See K2–99 AUTOMATIC TRANSAXLE AND
TRANSFER REMOVAL/INSTALLATION.)
(See Automatic Transaxle Workshop Manual
JA5A-EL.)
ATF temperature (°C {°F})
-20 {-4}
0 {32}
20 {68}
40 {104}
60 {140}
80 {176}
100 {212}
120 {248}
130 {266}
6. Connect the terminal component No.2 connector.
End Of Sie
K2–84
AUTOMATIC TRANSAXLE
Resistance (kilohm)
15.87—17.54
5.73—6.33
2.38—2.63
1.10—1.22
0.56—0.62
0.31—0.34
0.18—0.20
0.11—0.12
0.09—0.10
TERMINAL COMPONENT No.2
A C
B D
INCREASES
ATF TEMPERATURE
A6E571419010202
A6E5714W117
A6E5614W003
E G
F H
A6E5714W118
CHARACTERISTIC
OF TFT SENSOR
INCREASES
A6E5714W119