Mazda Mazda6 Workshop Manual Supplement page 703

Output Shaft Assembly Note
1. Install the output shaft to the coupling unit and partially tighten the bolts.
2. Install the companion flange to the output shaft.
3. Secure the companion flange using the SST, and
tighten the bolts.
Tightening torque
36.3—53.9 N·m {3.7—5.4 kgf·m, 26.8—39.7
ft·lbf}
Bearing Assembly Note
1. Assemble the bearing to the coupling case using
the SSTs.
Coupling Case Assembly Note
Caution
• The coupling unit will be damaged if it is pressed directly by a press. Always press the coupling
unit into the coupling case using the SST.
1. Assemble the coupling unit to the coupling case
using the SSTs and a press.
ELECTRONIC 4WD CONTROL SYSTEM
49 S120 710
A6E63222118
"' / ! %'%
"' / ! %'$
A6J63222119
M
49 W010 107A
49 S032 333
A6J63222120
M–73