Mazda Mazda6 Workshop Manual Supplement page 625

Hide thumbs Also See for Mazda6:

Table of Contents

Snap Ring Disassembly Note

1. Mark the yoke and flont propeller shaft or york

and rear propeller shaft for proper reassembly.

2. Clamp the propeller shaft in a vise.

3. Remove the snap ring using a screwdriver.

Bearing Cup Disassembly Note

1. Use a copper hammer to loosen the propeller

shaft bearing cup, then remove the bearing cup.

2. Remove the opposite bearing cup in the same

3. Separate the propeller shaft and yoke.

4. Clamp the yoke in a vise.

5. Remove the bearing cups and the spider from the

yoke as in Step 1 and 2.

Locknut Disassembly Note

1. Mark the center yoke and center propeller shaft

for proper reassembly.

2. Clamp the center yoke in a vice.

3. Remove the locknut and spring washer.

PROPELLER SHAFT

Chapters

Table of Contents