Mazda Mazda6 Workshop Manual Supplement page 797

Hide thumbs Also See for Mazda6:

Table of Contents

7. Set the side window glass in place and insert the

pins and fastener into the body. Install the side

window glass.

8. Allow the sealant to harden completely.

Sealant hardening time: 24 hours

REAR WINDOW GLASS REMOVAL

1. Remove the rear wiper motor.

2. Apply protective tape along the edge of the body to protect it from damage.

3. Cut the lip of the rear window molding using a

• Using a razor with bare hands can cause

injury. Always wear gloves when using a

• The rear window molding is a replacement

Not Reusing Glass

• For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under

"Reusing Glass."

1. Use a SST, and insert the blade into the sealant.

2. Pull through the sealant around the edge of the

3. Remove the glass.

WINDOW GLASS

GLASS MOLDING

A6E773863931201

Chapters

Table of Contents