4. Insert the spacer into the body.
5. Use only glass primer on the glass, and body primer on the body and the molding. Allow it to dry for
approximately 30 minutes.
Caution
• Keep the area free of dirt and grease, and do not touch the surface or the primer may not properly
bond to the surface of the glass and body, which may cause leaks to occur.
BODY SIDE
*2
6.0 {0.24}
*1
11.0 {0.43}
SEC. A
A
—
6. Apply sealant to the area of the glass surface as
shown in the figure.
WINDOW GLASS
PRIMER
APPLICATION AREA
*1
9.5 {0.37}
*1
9.5 {0.37}
*2
11.5 {0.45}
4.0 {0.16}
SEC. B
A
SIDE WINDOW GLASS SIDE
A
A
6.0 {0.24}
*1
11.0 {0.43}
6.0 {0.24}
*2
B
—
*1: PRIMER APPLICATION AREA
*2: POSSIBLE PRIMER APPLICATION AREA
APPLY SEALANT
TO THIS AREA.
90˚
A
SPACER
SEC. A
A
—
A6A7738W104
B
B
PRIMER
APPLICATION AREA
C
C
*1
9.5 {0.37}
*2
5.0 {0.20}
*1
11.0 {0.43}
SEC. C
C
—
mm {in}
A6A7738W105
5 {0.20}
90˚
11 {0.43}
mm {in}
A6A7738W106
S–15
S