Mazda Mazda6 Workshop Manual Supplement page 794

3. Align the front end-face of roof molding No.2 at a
position 216 mm {8.5 in} from the rear end-face
of roof molding No.1.
4. Press in roof molding No.2 along the direction (1)
shown in the figure and attach it to clips B at the B
section.
5. Align the front end-face of roof molding No.3 at a
position 47 mm {1.9 in} from the rear end-face of
roof molding No.2.
6. Press in roof molding No.3 along the direction (2)
shown in the figure and attach it to clips B at the B
section.
End Of Sie
MOLDING
ROOF MOLDING No.1
FRONT 216 mm
{8.5 in}
CLIP B
ROOF MOLDING No.2
FRONT
TOP VIEW
CLIP B
(1)
b
B B B
ROOF MOLDING No.2
TOP VIEW
SEC. b—b
(2)
b
B B
47 mm
{1.9 in}
ROOF MOLDING No.3
SEC. b—b
A6A7730W105
A6A7730W106
S
S–13