Brake Fluid Level Sensor Inspection - Mazda MX-5 Miata Sport 2007 Manual

Fig. 15: Adjusting Pushrod Length
Courtesy of MAZDA MOTORS CORP.
6. Install the master cylinder to the power brake unit.

BRAKE FLUID LEVEL SENSOR INSPECTION

1. Disconnect the brake fluid level sensor connector from the master cylinder.
2. Inspect for continuity according to fluid level between the brake fluid level sensor terminals.
If not as indicated in Fig. 16 , replace the reserve tank.

2007 Mazda MX-5 Miata Sport
2007 BRAKES Conventional Brake System - MX-5 Miata