Table of Contents
Advertisement
Refer to the following sheet for monitor window parameter information.
SN
Parameter
1-4
Display
device
information
5
Digital
zoom
6
Change
show mode
7
Local
record
8
Capture
picture
9
Audio
10
Close video
11
Channel
number
6.2.2 Playback
Click local play to open recorder. The playback bar is shown below:
1
1- Playback process control
2- Play
3- Pause
4- Stop
5- Slow play
6- Fast play
Once you selected window is in real-time monitor mode, system automatically switches to playback the video by
default.
6.3 System Menu
For detailed information refer to:
- Chapter 7 : Configuration,
- Chapter 8 : Search,
- Chapter 9 : Alarm,
- Chapter 10: About,
- Chapter 11 : Log out.
- 1: Device IP address.
- 2: Channel number.
- 3: Bit stream.
- 4: Stream decode type.
- S1: Overlay.
- S2: Off stream.
- S3:GD1
- H1: Overlay
- H2: off stream decoding from the display card.
Click this button and then left drag the mouse in the zone to zoom in.
Right click mouse system restores original status.
Resize or switch to full screen mode.
Click this button to begin local recording.
The recorded file is saved by default to folder: C:\RecordDownload.
Click this button to snapshot.
Images are memorized in folder: C:\ Picture download (default).
Turn on or off audio.
Close video in current window.
Current view channel number.
2
3
4 5
6
28
Function
Advertisement
Table of Contents
