Switching X-Ray Unit On - Planmeca ProMax 3D Max User Manual

6

SWITCHING X-RAY UNIT ON

Stationary column top
User's Manual
On / off switch
NOTE To prolong the lifetime of the Planmeca ProMax 3D
SWITCHING X-RAY UNIT ON
The on / off switch is located on the underside of the
stationary column top. When you switch the X-ray unit on
the main display will be shown on the control panel and
the unit will carry out a self-test which will last a few
seconds.
The X-ray unit is then ready for use.
Max X-ray unit, always switch the X-ray unit off when it
is not in active use.
Planmeca ProMax 3D Max 9