Restart Mode - Alpha Group OutBack Power FLEXmax Series Owner's Manual

Night Light
Float
Diversion: Relay and Solid St
Figure 72
Low Batt Disconnect
Remote

Restart Mode

This item selects between continuous MPPT, or occasional MPPT restarts. (See pages 21 and 52.)
C
900-0009-01-00 Rev
Set Points :

Active: High

Threshold

Hysteresis Time

ON Time
Figure 70 Night Light
Set Points : None
Figure 71
Set Points (NOTE: All items function identically for both Diversion:
Relay and Diversion: Solid St, except for

Active: High

Relative Voltage

Hysteresis

Hold

Delay
Diversion:Relay and Diversion: Solid St
Set Points:

Disconnect

Re-Connect

Disconnect Delay
Figure 73 Low Batt Disconnect
Set Points: None
This mode can also be used for the MATE3's AGS function. See
pages 41 and 66 for important information on this function.
Figure 74
Set Points:

0
– Continuous MPPT,
in MPPT charging,
any mode.
Figure 75 Restart Mode
Low
or .
Float
or Low . (Not present in
Remote
1
– Automatic re-sweep every 90 minutes
2
– Automatic re-sweep every 90 minutes in
MATE3 Screens
Active: High Low
or ):
Diversion: Solid St )
67