Status Screen - Alpha Group OutBack Power FLEXmax Series Owner's Manual

Status Screen

The status screen displays system information. See page 18 for detailed information of the different
modes of operation.
The optional OutBack system display shows CC (Charge Controller) status screens for convenient
distant viewing from the installation location. See page 59 for the FLEXmax screens displayed on the
MATE3. Please see pages 71 to 83 to view the FLEXmax screens displayed on the MATE (or MATE2).
Status Screen
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
C
900-0009-01-00 Rev
PV Input Voltage
PV Input Current
Battery Voltage
Output Current
Instantaneous
Kilowatts
Daily Accumulated
Kilowatt-hours
AUX Status
(ON or OFF)
Mode of Operation
See page 20
Figure 11 Status Screen
The PV voltage will slowly rise to the battery
voltage level even when the PV breaker is off –
this is normal as the PV capacitors charge up.
Navigation
Status Screen
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Pressing the first soft key (SK1)
opens the main menu screen.
Status Screen
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Pressing SK2 opens the end-of-day
summary menu and logging.
Operation
17