Chapter 4: System Setup; Removing The Chassis Cover - Nexcom VTC 7252 Series User Manual

Chapter 4: System Setup

C 4: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. Remove the screws on the front panel.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
34
2. Remove the screws on the rear panel.
VTC 7252-7C4IP User Manual