To Install Sata Raid Driver On Windows 2K/Xp - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

5-4 To Install SATA RAID Driver on Windows 2K/XP

SATA-RAID Driver is incorporated in Support CD/Floppy Diskette for
user's installation. This driver is intended forWinXP/2K only.
Since Intel has not yet provided RAID driver for Win98, ICHR RAID
system run with Win98 is not recommended
(1) Get ready the Floppy Diskette holding the RAID Driver.
(This Driver Diskette should have been enclosed in the mainboard
Package. If you cannot find one, you must make one with the RAID
Driver CD before system installation.)
(2) Check that SATA Hard Disks are connected properly to the SATA
Connectors.
(3) Start your PC system and use RAID BIOS Setup Utility to configure
RAID 0 or RAID 1 to the hard disks. (For SATA Interface, skip the
RAID configuration.)
(4) Restart System and format the bootable hard disks.
(5) Now, apply the Windows 2000/XP CD to CD-ROM for operating
system installation.
(6) On the Windows 2000 Setup screen, press "F6" key to set up RAID
driver for Windows 2000/XP.
Windows
Press F6 if you need to install a third party SCSI or RAID driver....
Chapter 5 ICH6R SATA RAID
90