To Enter Intel Raid Bios Utility Setup - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

5-2 To Enter Intel RAID BIOS Utility Setup

Boot the system with "SATA-RAID " enabled in system BIOS Setup and
watch for the following initial screen to appear:
Inrel (R) Application Acceleration RAID Option ROM vxxxxxxx
Copyright (C) 2003-04 Intel Corporation. All right reserved.
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0 ST380023AS
2 Maxtor 6Y120M0
Press <CTRL-I > to enter Configuration Utility..
(The above message indicates that the SATA hard disks on board are detected by the
RAID BIOS.)
As soon as the above screen appears, press < CTRL-I > key to enter
Intel RAID Configuration Utility.
In a few seconds, the Intel RAID Setup Utility appears as shown below:
Inrel (R) Application Acceleration RAID Option ROM vxxxxxxx
Copyright (C) 2003-04 Intel Corporation. All right reserved.
RAID Volumes:
None Defined.
Phical Disks:
Port Drive Model
0 ST380023AS
2 Maxtor 6Y120M0
[ ]-Select
Serial # Size
XXXXXXXXX 115.0GM
XXXXXXXXX 114.0GM
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ Disk/Volume Information ]
Serial #
XXXXXXXXX
XXXXXXXXX
[ESC] - Exit
Chapter 5 ICH6R SATA RAID
Type/Status(Vol ID)
Non-RAID Disk
Non RAID Disk
Size Type/Status
115.0GM Non-RAID Disk
114.0GM Non-RAID Disk
[Enter] - Select Menu
86