2-8.2 Jkb1: Keyboard/Mouse Wake-Up; 2-8.3 Jbat1: Clear Cmos - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR
The following diagrams show the locations and settings of jumpers on
the mainboard.

2-8.2 JKB1: Keyboard/Mouse Wake-up

JKB1
Keyboard/Mouse Wake-up
2-3 closed
Disabled
1
1-2 closed
Enabled
1

2-8.3 JBAT1: Clear CMOS

When you have problem with rebooting
your system, you can clear CMOS data and
restore it to default value. To clear CMOS
with Jumper JBAT1, please follow the steps
below:
1. Power off system.
2. Set JBAT1 to Pin 2-3 closed.
3. After 2 or 3 seconds, return the JBAT1
setting to Pin1-2 closed.
4. CMOS data are restored to default.
Remember never clear CMOS
when system power is on.
JKB1 is designed to enable / disable the
PS/2 Keyboard or PS/2 Mouse Wake-up
(from suspend mode). Setting JKB1 to
1-2 closed will enable this function while
setting JKB1 to 2-3 closed will disable
this function.
Yet users still have to choose the KB/
Mouse Wake-up mode in BIOS setup.
(default)
USB KB/Mouse Wake-up is optionally
supported on this mainboard.
Chapter 2 Hardware Setup
SATA4
SATA3
SATA2
SATA1
Clear CMOS
1
1
26
JBAT1
1-2 closed
(default)
To hold data
2-3 closed
To clear CMOS