1-4.10 Multi-I/O Functions; 1-4.11 Sata/Ahci/ / Sata Raid Interface (On Sl-B5A-Fgr); 1-4.12 Hardware Monitor On Board; 1-4.13 Gigabit Ethernet On Board - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

1-4.10 Multi-I/O Functions

• PCI EIDE Controller, supporting:
-- 1 ATA 100 / 66 IDE connectors supporting up to 2 IDE devices
• Dedicated IR Functions:
-- 1x5 IR connector dedicated to IR function with Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Floppy Drive Connector:
-- 1 FDD connector supporting 1 floppy drive for barebone system
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant, 480 Mb/s USB Bus, supporting Windows 98 and
later operating systems; USB drivers provided in Support CD for installation
-- 4 built-in USB connectors and 2 more USB pin-headers which require 2
optional USB cables to provide 4 more USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- 1 complete serial port on board.

1-4.11 SATA/AHCI/ / SATA RAID Interface (on SL-B5A-FGR)

Serial ATA/AHCI / RAID Interface supported by ICH6R:
• Supporting 4 Serial ATA / SATA RAID connectors for 4 SATA Hard
Disks with 150MB/s transfer rate
• SATA RAID Hard Disk should be set up in pair on SL-B5A-FGR
• Serial ATA AHCI/RAID Drivers enclosed in Support CD/Floppy Dis-
kette for user's installation

1-4.12 Hardware Monitor on board

• Hardware Monitor integrated, providing monitoring functions on hard-
ware voltage, temperatures and fan speeds.
• Utility Software Soltek Hardware Monitor for displaying monitor sta-
tus is enclosed in Support CD for user's installation.

1-4.13 Gigabit Ethernet on board

PCI local bus single-chip Gigabit Ethernet Controller RTL8110S on
board:
• Supporting 10/100/1000Mb data transfer
• Supporting Wake On LAN function through the on-board RJ45 LAN
Connector

1-4.14 Form Factor

• Soltek SFX Power Supply
• Mainboard size: 180mm x 270mm
Chapter 1 Specification
14