SOLTEK SL-B5A-FG Manual page 89

SL-B5A-FG / B5A-FGR
(9) On the next screen, you are prompted to install the "Intel(R) 82801FR
Controller" driver.
So, select 82801 SATA RAID Controller and press<Enter> on to
continue.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press
ESC to return to the previous screen.
Enter=Select
(10) Next screen will show that you have chosen the RAID device driver
to set up. Press Enter to continue, and the Installation Program will
then guide you through the rest of system setup.
Windows Setup
Setup will load support for the following mass storage driver(s):
Intel(R) 82801FR SATA RAID Controller
* To specify additional SCSI adapters, CD-ROM drives, or
special disk controllers for use with Windows, including
those for which you have a device support disk from a
mass storage device manufacturer, press S.
* If you do not have any device support disks from a mass
storage device manufacturer, or do not want to specify
additional mass storage devices for use with Windows,
press ENTER.
S=Specify Additional Device
(11) When the system is completely installed, the RAID driver will also
be installed into the system.
Attention: ICH6R RAID Controller does not support Windows Me/9X.
Intel(R) 82801FR AHCI Controller
Intel(R) 82801FR SATA RAID Controller
F3=Exit
Chapter 5 ICH6R SATA RAID
Enter=Continue
92
F3=Exit