Sfx Power Supply Installation - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

2-7 SFX Power Supply Installation

+12V Power Connector
Soltek SFXV3.01 Power Supply is strongly recommended for mainboard
running with this mainboard.
To set up Power Supply on this mainboard:
1. Connect the on-board Main Power Connector (20-pin) to the Main
Power Connector (20-pin) of an SFX Power Supply which can be of
the latest version V3.01 model, and then connect the square-shaped
+12V Power Connector on board to the square-shaped +12V Power
Connector of the Power Supply.
Warning: Both the Main Power Connector and the +12V Power
Connector should be connected to Power Supply; otherwise, the
system may either not start or be damaged.
2. This SFX Power Supply should be able to provide at least 720mA/
+5V standby power for Wake On Lan function.
PCIEX
GND
GND
2
1
4
3
+12V +12V
Chapter 2 Hardware Setup
SATA4
SATA3
SATA2
SATA1
Main Power
Connector
+12V
5SB
PWR OK
GND
+5V
GND
+5V
GND
+3.3V
+3.3V
Pin1
24
+5V
+5V
-5V
GND
GND
GND
PS ON#
GND
-12V
+3.3V
Pin11