4-6.3.3 Floppy Configuration - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR
4-6.3.2-3 Hard Disk Write Protect
Hard Disk Write Protect
Allows you to Enabled / Disable(default) Hard Disk Write Protection
4-6.3.2-4 IDE Detect Time Out
IDE Detect Time Out(Sec)
Allows you to set time out for IDE Detection.
Choices: 0 ~ 35 seconds in 5 seconds stepping
4-6.3.2-5 ATA(PI) 80Pin Cable Detection
ATA(PI) 80Pin Cable Detection
Allows you to select ATA(PI) devices for 80Pin Cable Detection. To set Host & Device allows
onboard IDE controller and IDE disk drive to detect the type of IDE cable used.
Choices: Host & Device, Host, Device
4-6.3.2-6 S-ATA Detection Delay
S-ATA Detection Delay
Allows you to enable/disable the S-ATA Detection Delay
function. Detection.
Choices: Enabled; Disabled

4-6.3.3 Floppy Configuration

Choose "Floppy Configuration" in "Advanced BIOS Features" and press
<Enter>. The following sub-screen will appear for configuration:
Floppy Configuration
Floppy A
Floppy B
Floppy A/B
Press Enter on "Floppy A/B" will let you select this field to the types of floppy disk drives
installed in your system.
The choices are: 360KB 5.25 in.; 1.2MB, 5.25 in.
720KB, 3.5 in.; 1.44MB, 3.5 in.
2.88MB, 3.5 in.; Disabled
Floppy Configuration
1.44 MB 3.5 in
Disabled
58
Chapter 4 BIOS Setup
Help Item
Select the type of floppy
drive connected to the
system.