To Install Usb 2.0 Driver For Windows 2000/Xp; To Install Sata Raid Driver For Windows 2000/Xp - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

3-8 To Install USB 2.0 Driver for Windows 2000/XP

USB V2.0 with its 480Mb/s transfer rate supports operating system
Windows 2000 and Windows XP via the Windows 2000 and Windows
XP Service Pack. For archieving Intel USB 2.0 support, users should
install the latest Service Pack for Windows 2000 or Windows XP.
1. After installation of Intel Chipset software installation Utility in Windows
2000 or Windows XP, start to install the latest Service Pack version
into the operating system. The installation of the latest Service Pack
will support USB2.0 in Windows 2000 or Windows XP now.(The latest
Service Pack can be found in Microsoft Web Site.)
2. To verify USB2.0 installation, please enter "Device Manager" of "My
Computer". On the "Device Manager" screen, you should be able to
see the item "Standard Enhanced PCI to USB Host Controller",
verifying USB2.0 Driver is installed successfully.

3-9 To Install SATA RAID Driver for Windows 2000/XP

SATA RAID driver for ICH6R RAID controller supports Windows 2000/
XP only. To install this SATA RAID driver, please refer to Chapter 5
SATA RAID Driver installation.
Chapter 3 Software Setup
47