4-6.3.4 Super Io Configuration - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

4-6.3.4 Super IO Configuration

Choose "SuperIO Configuration" in "Advanced BIOS Features" and press
<Enter>. The following sub-screen will appear for configuration:
Configure ITE8712 Super IO Chipset
OnBoard Floppy Controller
Floppy Drive Swap
Serial Port1 Address
Serial Port1 Mode
Serial port2 Address
Serial port2 Mode
OnBoard Floppy Controller
Allows you to enable / disable the Onboard Floppy Controller.
Choices: Enabled; Disabled
Floppy Drive Swap
Allows you to enable / disable the Floppy Drive Swap function..
Choices: Enabled; Disabled
Serial Port1/2 Address
Allows you to set the Onboard Serial Port1/2 Address.
Choices: Disabled; 2E8/IRQ3; 3F8/IRQ4; 3E8/IRQ4;
Serial Port 1/2 Mode
If Serial Port2 Address is not disabled, it allows you to set
the Serial Port 2 Mode. Choices:
-- Normal;
-- IrDA: Providing 2 items for configuration:
IR I/O Pin Select: SINB/SOUTB; IRRX/IRTX
IR Duplex Mode: Half Duplex; Full Duplex
-- ASK IR: Providing 2 items for configuration:
IR I/O Pin Select: SINB/SOUTB; IRRX/IRTX
IR Duplex Mode: Half Duplex; Full Duplex
SuperIO Configuration
Enabled
Disabled
3F8/IRQ4
Normal
2F8/IRQ3
Normal
59
Chapter 4 BIOS Setup
Help Item