Table of Contents
Advertisement
K8AV2-R / K8AV2-RL
5-6 To Install SATA/SATA-RAID Driver
SATA/SATA-RAID Driver is incorporated in Support CD/Floppy Diskette
for user's installation. This driver is intended for both SATA and SATA
RAID installation.
5-6-1 To Install SATA/SATA RAID Driver on Win 2K/XP
(1) Get ready the Floppy Diskette holding the RAID Driver.
(This Driver Diskette should have been enclosed in the mainboard
Package.)
(2) Check that SATA Hard Disks are connected properly to the SATA
Connectors.
(3) Start your PC system and use RAID BIOS Setup Utility to configure
RAID 0 or RAID 1 to the hard disks. (For SATA Interface, skip the
RAID configuration.)
(4) Restart System and format the bootable hard disks.
(5) Now, apply the Windows 2K/XP CD to CD-ROM for operating system
installation.
(6) On the Windows 2000 Setup screen, press "F6" key to set up RAID
driver for Win 2K/XP.
(7) On next screen when you are instructed to insert the RAID Driver
Diskette into Floppy drive, follow the instruction to continue and
complete the installation.
94
Advertisement
Table of Contents
