4-6.7.4 Change User Password - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR
User Access Level
If Supervisor Password is set up, this item appears to allow you to set
the User Access mode.
Choices: No Access; View only; Limited; Full Access

4-6.7.4 Change User Password

This option allows you to set a new User password for the system:
1. Choose "Change User Password" in the "BIOS Security Features"
and press <Enter>. Then the following message appears:
2. The first time you run this option, enter your password up to 6 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears, prompt-
ing you to confirm the password:
4. Enter the same password "exactly" the same as you have just typed
to confirm the password and press <Enter>.
5. The following message appears to confirm the new password setup.
6. Then press any key to continue your CMOS Setup. To save the pass-
word setup, you should press "Save Changes and Exit" and choose
"OK" to exit and save setup.
Pass word Check
Password Check Allows you to set BIOS to check up password with a
[ Enter New Password ]
[ Confirm New Password ]
[ Password installed ]
[OK]
password prompt at BIOS Setup or whenever re-
starting system. This option will appear when you
have set Supervisor Password or User Password.
Choices: Setup (default); Always
79
Chapter 4 BIOS Setup