Chapter 2 Hardware Setup - SOLTEK SL-B5A-FG Manual

SL-B5A-FG / B5A-FGR

Chapter 2 Hardware Setup

To Get Things Ready for Hardware Setup !
1. We recommend to install your CPU before any other components.
For detailed installation instructions of processor, you can also refer
to the pamphlet enclosed in your CPU package.
2. Installing a cooling fan with a good heat sink is a must for proper
heat dissipation for your CPU. Get ready an appropriate fan with
heat sink for proper installation. Improper fan and installation will
damage your CPU.
3. In case CPU Vcore, CPU clock or Frequency Ratio is adjustable on
board, please follow the instructions described in the User's manual
for proper setup. Incorrect setting will cause damage to your CPU.
The following topics are included in this chapter:
2-1 P4 775-pin CPU and Socket LGA 775 ................................ 16
2-1.1 To Identify a P4 775-pin CPU .................................................... 16
2-1.2 To install P4 775-pin CPU into Socket LGA 775 .................... 16
2-1.3 P4 775-pin CPU Installation with Hyper-threading .............. 18
2-2 Memory Installation ............................................................. 19
2-2.1 To Install DDR SDRAM Module .............................................. 19
2-2.2 Dual Channel Memory Features ............................................... 19
2-2.3 PCI Express Slot / VGA connector Installation ..................... 20
2-4 IDE Connector Installation ................................................. 21
2-5 SATA /AHCI/ RAID Connectors ......................................... 22
2-6 Floppy Drive Installation ..................................................... 23
2-7 SFX Power Supply Installation ........................................... 24
2-8 Jumper Setting ....................................................................... 25
2-8.1 How to tackle the Jumpers: ....................................................... 25
2-8.2 JKB1: Keyboard/Mouse Wake-up ............................................ 26
2-8.3 JBAT1: Clear CMOS .................................................................. 26
2-9 Other Connectors Configuration ........................................ 27
Chapter 2 Hardware Setup
15