To Install Sata Raid Driver; To Install Sata Raid Driver On Windows 2000/Xp - SOLTEK SL-KT880E-GR Manual

SL-KT880E-GR/RL/R

5-5 To Install SATA RAID Driver

SATA-RAID Driver is incorporated in Support CD/Floppy Diskette for
user's installation. This driver is intended for both SATA and SATA RAID
installation.

5-5-1 To Install SATA RAID Driver on Windows 2000/XP

(1) Get ready the Floppy Diskette holding the RAID Driver.
(This Driver Diskette should have been enclosed in the mainboard
Package.)
(2) Check that SATA Hard Disks are connected properly to the SATA
Connectors.
(3) Start your PC system and use RAID BIOS Setup Utility to configure
RAID 0 or RAID 1 to the hard disks. (For SATA Interface, skip the
RAID configuration.)
(4) Restart System and format the bootable hard disks.
(5) Now, apply the Windows 2000/XP CD to CD-ROM for operating
system installation.
(6) On the Windows 2000 Setup screen, press "F6" key to set up RAID
driver for Windows 2000/XP.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver....
(7) On next screen when you are instructed to insert the RAID Driver
Diskette into Floppy drive, follow the instruction to continue and
complete the installation.
92