5-6 Install nVIDIA RAID Driver for Windows 2000/XP
nVIDIA RAID Driver is incorporated in Support CD/Floppy Diskette for
user's installation. This driver is intended for Windows 2000/XP.
(1) Get ready the Floppy Diskette holding the RAID Driver.
(This Driver Diskette should have been enclosed in the mainboard
Package.)
(2) Check that Hard Disks are connected properly to the RAID conn-
tors.
(3) Start your PC system and use RAID BIOS Setup Utility to configure
RAID 0 / 1/ 0+1 to the hard disks.
(4) Restart System and apply the Windows 2000/XP CD to CD-ROM
for operating system installation.
(5) On the Windows 2000/XP Setup screen, press "F6" key for RAID
driver setup.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver....
Chapter 5 Promise RAID Setup
87